Tag: JBand

The J-Band Blog

In Case Studies , Infrastructure , Pave the Way

Dakota County Minnesota Building Longer-Lasting, Safer Roads

J-Band
Many states are looking for methods to improve longitudinal joint performance of their asphalt pavements since these joints often fail before the rest of the surface. With their inherently lower density, longitudinal joints fail by cracking, raveling and potholing because of the intrusion of air and water. Due to their longitudinal joint issues,...
Continue Reading
3
October 20, 2021 by Zoe Buhl
In Rumble Strips , Safety

Rural Roadway Departure Accidents – An Alarming Trend that Needs Reversed

J-Band
Reducing fatalities on rural roads remains a major challenge in the United States. In 2016, 18,590 lives were lost on rural roads-more than half of all traffic deaths-even though only 19 percent of the U.S. population lives in rural areas. Two-thirds of these rural fatalities involved a roadway departure, where...
Continue Reading
2
October 15, 2021 by Zoe Buhl
In Case Studies , Pave the Way

Steuben County Indiana invests in VRAM to Help Construct Longer-lasting, Safer Roads

J-Band
The longitudinal joint is the Achilles’ heel of every road. Road managers know the first part of the pavement to fail is the longitudinal joint. As the road’s most permeable part, this joint is susceptible to the elements. Air and water work down through this unavoidable seam in the pavement...
Continue Reading
2
October 11, 2021 by Zoe Buhl
In Case Studies , Pave the Way

Janesville, WI Records Successful First Application of VRAM

J-Band
On September 9, the city of Janesville, Wisconsin recorded their first use of VRAM on Beloit Avenue. This project is part of the City of Janesville’s 2021 Street Rehabilitation Program. The road was tacked Wednesday evening September 8. Then pre-dawn on the Thursday, 4,663 LF of VRAM was placed.  Later...
Continue Reading
2
September 20, 2021 by Zoe Buhl
In Case Studies

DuPage County Illinois Finds Success Protecting Pavements

J-Band
Studies have shown that longitudinal joints in pavements are often the weakest areas of a road. Typically the joints are low in density, high in voids and thus are highly permeable. These areas become conduits to air and water infiltration which leads to damage and premature pavement failure.(1) During the...
Continue Reading
2
September 17, 2021 by Zoe Buhl
In Case Studies

Oakland County Michigan Finds Success Using VRAM

J-Band
Used since 2002 and now across 19 states, J-Band has a proven track record of delivering longer road life, while also offering an impressive return on investment. Developed at the laboratories of Heritage Research Group, J-Band is applied during the road construction process just below the final layer of asphalt...
Continue Reading
2
August 24, 2021 by Zoe Buhl