Tag: J-Band

The J-Band Blog

VRAM Helping Clinton County, Indiana Create More Sustainable Roads

J-Band
About this project: A VRAM project took place on November 8th in Clinton County, Indiana. This project on State Road 28 stretched from South Jackson Street to O’Neil Street in the city of Frankfort, Indiana. VRAM was applied with a targeted 18” wide band to the centerline joint, prior to...
Continue Reading

City of Bloomington, Illinois Utilizing VRAM

J-Band
About this project: On October 6th, a Void Reducing Asphalt Membrane, (VRAM), project took place on McLean Street in the city of Bloomington, Illinois. This 33,291-foot project that occurred on McLean Street stretched from East Oakland Avenue to East Washington. (Note: in Illinois VRAM is often referred to as LJS)....
Continue Reading

Illinois Building a More Sustainable and Resilient Infrastructure

J-Band
About this project: A recent VRAM project took place in Will County, Illinois on September 19th. This was an Illinois Department of Transportation (IDOT) Project. The 292,608-foot project in Lawrence County started in the northbound lanes, covering a stretch south of I-80 to just south of Weber Road. VRAM was...
Continue Reading

How Ohio Enhances Road-Life & Quality with VRAM

J-Band
About this project: A Void Reducing Asphalt Membrane, VRAM, project took place on State Road-21 in Tuscarawas County, Ohio on September 17th. This Project was by the Ohio Department of Transportation (ODOT). This project covered 1.47 miles on this two-lane highway between Strasburg and Beach City, Ohio. The project started...
Continue Reading

See How Illinois Utilizes VRAM in Cass & Sangamon Counties

J-Band
About this project: A Void Reducing Asphalt Membrane, (VRAM), project took place on July 20th and 21st in Cass & Sangamon Counties in the state of Illinois. This project had 4.8 miles of overlay, and ADA improvements on IL-125 from 0.1 miles west of the Sangamon County line to Richland...
Continue Reading

How Ohio Enhanced Its Performance of the Longitudinal Joint

J-Band
The longitudinal joint is the first part of the pavement to fail. As a road’s most permeable part, this joint is susceptible to the elements, such as air and water that work down through this gap, causing the joint to deteriorate, crack and pothole. When the longitudinal joint fails, the...
Continue Reading